Janet

The headset of your bike is located inside the headtube and allows the fork steering column and front wheel to rotate and turn. The headset can loosen over time with normal use, so it is important ...

The RadRunner chain tensioner can be replaced if you are instructed to do so by Rad Power Bikes Product Support. Follow the steps below to replace the chain tensioner. If you are not confident in...

The wiring harness connects various electrical components on your bike. If instructed by Rad Power Bikes Product Support to perform a wiring harness connector check, follow the steps below to check...

The headset of your bike is located inside the headtube and allows the fork steering column and front wheel to rotate and turn. The headset can loosen over time with normal use, so it is important ...

This article will show you (or your bike mechanic) how to replace the handlebar stem on your RadRover 5 and RadRover Step-Thru 1.  Watch the video and follow the written instructions below.  This...

If your RadRover Step-Thru fails to power on or the LCD display shows an "Error 30," you can troubleshoot the issue by resetting the connection to the bike's electrical components. It is important ...

The RadRover Step-Thru controller can be replaced if you are instructed to do so by Rad Power Bikes Product Support. Watch the video below and follow the instructions to replace the controller on y...

The RadRover Step-Thru wiring harness runs through the downtube and connects various electrical components to the controller. The wiring harness can be replaced if you are instructed to do so by Ra...

If your RadMission fails to power on or the Pedal Assist Level lights on the LED display are all flashing as shown below, you can troubleshoot the issue by resetting the connection to the bike's el...

This guide will show you how to remove and install a rear wheel on a RadMission.  If you are not confident in your ability to successfully and safely perform all steps, we recommend having the wor...