Janet

The RadRover Step-Thru wiring harness runs through the downtube and connects various electrical components to the controller. The wiring harness can be replaced if you are instructed to do so by Ra...

If your RadMission fails to power on or the Pedal Assist Level lights on the LED display are all flashing as shown below, you can troubleshoot the issue by resetting the connection to the bike's el...

This guide will show you how to remove and install a rear wheel on a RadMission.  If you are not confident in your ability to successfully and safely perform all steps, we recommend having the wor...

The headset of your bike is located inside the headtube (the front of the bike frame) and allows the handlebar and stem to turn the fork steering column and front wheel. The headset can loosen over...

The RadMission wiring harness connects various electrical components, runs through the downtube of the frame, and is replaceable if needed. If instructed by Product Support to replace the wiring ha...

The RadMission controller can be replaced if instructed to do so by Rad Power Bikes Product Support. Follow the instructions below to replace the controller on a RadMission.  If you are not confid...

The RadMission headlight can be replaced if instructed to do so by Rad Power Bikes Product Support. The headlight can be replaced without replacing the bracket. If needed, the headlight and the bra...

The RadMission chain tensioner can be replaced if you are instructed to do so by Rad Power Bikes Product Support. Follow the instructions below to replace the chain tensioner.  If you are not confi...

The 2017/2018 RadMini wiring harness can be replaced if you have been instructed to do so by Rad Power Bikes Product Support. Follow the steps below to replace the wiring harness.  If you are not ...

The RadMini Step-Thru wiring harness can be replaced in the unlikely event it is damaged or determined to be non-functional by Rad Power Bikes Product Support. Watch the video below and follow the ...