Janet

This guide will show you how to remove and reinstall the rear wheel on a RadWagon. The photos below show a 2018 RadWagon, but the process will be similar for most RadWagon models. Tools Needed: Wo...

The 2017 and 2018 RadWagon cargo bikes feature a front derailleur. If the chain is making excessive noise, shifting poorly, or falling off the chain ring (at the center of the pedal cranks), the fr...

The RadWagon front fork can be replaced if instructed to do so by Rad Power Bikes Product Support. Follow the steps below to replace the front fork. If you are not confident in your ability to su...

The RadWagon controller can be replaced in the unlikely event it is damaged or determined to be non-functional by Rad Power Bikes Product Support. This guide uses a 2018 RadWagon, but the process w...

To troubleshoot an "Error 30" message on a RadWagon, perform a connector check to ensure all connectors are secure and in good condition. This guide uses a 2019 RadWagon but the steps will be simil...

The headset of your bike is located inside the headtube and allows the fork steering column and front wheel to rotate and turn. The headset can loosen over time with normal use, so it is important ...

The headset of your bike is located inside the headtube and allows the fork steering column and front wheel to rotate and turn. The headset can loosen over time with normal use, so it is important ...

The wiring harness is a component made of wires that connects the electrical components on your ebike. On the RadWagon, the wiring harness can be found at the front of the bike and runs through the...

The RadWagon 4 comes with an adjustable handlebar stem that can be adjusted to comfortably fit any rider. Over time and with normal use, the handlebar stem lever may need to be adjusted if the mech...

The RadWagon 4 kickstand springs can be replaced if needed after wearing out with normal use over time, or in the unlikely event they are damaged or determined to be non-functional by Rad Power Bik...